3D CAD(3d 変換) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.

3D CAD Product List

1～15 item / All 15 items

Displayed results
High-spec 3D viewer "3DTascalX"

High-spec 3D viewer "3DTascalX"

This is a 3D viewer that adopts the same kernel as 3D CAD, achieving high functionality and low cost, positioned as "more than a viewer but less than CAD."

High-quality data conversion that enables various 3D CAD data input and output, high-precision measurement that can be used for processing and inspection utilizing auxiliary coordinates, easy 2D drawing generation from 3D, and the ability to verify a wide range of secondary usable data such as design change locations, heights, slopes, holes, undercuts color-coded, projected areas, cross-sections, surface areas, and mass. By utilizing this in various manufacturing processes such as sales estimation, drawing inspection, construction method consideration, data conversion, processing drawings, inspection, and assembly instructions, it promotes the effective use of your company's three-dimensional data. 【Features】 - A wide range of supported data including CATIA V4, V5, NX, Creo, SolidWorks, JT, Parasolid, IGES, STEP, ACIS, Cfio, Inventor, 3D PDF, etc. - Dedicated functionality for batch processing data conversion - High-precision measurement with an accuracy of up to 1/10,000,000 - Approximate circular arc interpolation for ellipses and splines - Visual verification made easy by color-coding design change locations, heights, slopes, holes, undercuts, etc. - Ability to share a lot of information with minimal licensing using a free viewer.

  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Free trial version download!! 3D viewer 3DTascalX

Free trial version download!! 3D viewer 3DTascalX

A 3D viewer that achieves high functionality and low cost, positioned as 'more than a viewer but less than CAD.'

First, download the free trial version from the link below!! http://www.3dtascal.com/products/trial.html#3dt_trial By utilizing it in various processes of manufacturing such as sales estimates, inspection, construction method examination, data conversion, processing drawings, inspection, and assembly instructions, you can promote the effective use of your company's 3D data. 【Features】 - A wide range of supported data including CATIA V4, V5, NX, Creo, SolidWorks, JT, Parasolid, IGES, STEP, ACIS, Cfio, Inventor, 3DPDF, etc. - Dedicated functionality for batch processing data conversion - High precision measurement up to 1/10,000,000 order - Approximate circular arc interpolation for ellipses and splines - By color-coding design change areas, heights, slopes, holes, undercuts, etc., it can be visually verified in an easily understandable manner - Using a free viewer, it is possible to share a lot of information with the minimum necessary licenses.

  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D CAD "KEYCREATOR"

3D CAD "KEYCREATOR"

Fusion of 3D functionality and 2D drawing capabilities! Comprehensive support for the design trial-and-error process.

"KEYCREATOR" is a system that allows anyone to easily create 3D models with the feeling of drawing three-view drawings in 2D design. By avoiding careless mistakes during 2D design, it achieves a reduction in design time. By effectively utilizing existing 2D data, it eliminates the hassle of re-entering shapes while viewing 2D drawings, and thanks to interfaces with various 3D CAD systems, smooth work can be done without data compatibility issues through intermediate files. [Features] ■ Direct editing is possible even with data converted from other CAD systems. ■ 2D drawings, 3D wires, surfaces, and solids can all be used together in the same space. ■ Direct shape changes can be made simply by changing the dimension numbers. *For more details, please refer to the PDF materials or feel free to contact us.

  • Drawing, tracing, CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Free trial available! In any case, it's cheap! Simple 3D viewer 3DFovi.

Free trial available! In any case, it's cheap! Simple 3D viewer 3DFovi.

A simple 3D viewer that achieves an overwhelming low price of 46,200 yen, making it easy for beginners.

"3DFovi" is a 3D viewer that emphasizes "simplicity," achieving overwhelming low prices and easy operation. It can display major 3D CAD data such as CATIA V5, NX, Creo (formerly Pro/ENGINEER), SolidWorks, as well as 2D CAD data like DXF and DWG, and allows for simple measurements. Even users who already have a 3D viewer can reduce data conversion, management workload, and running costs due to the wide variety of supported data and low price. 【Features】 ■ Directly reads various data formats ■ Simple and easy-to-use functions for anyone 【Main Functions】 ■ Display, cross-section, split display ■ Measurement, volume, maximum outline calculation, numbering, comments, coloring The latest version also supports STL and VRML output. ★ A 30-day free trial version can be downloaded from the following link: https://www.3dtascal.com/products/trial.html

  • Scientific Calculation and Simulation Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The estimated man-hours for plastic molded products have been halved! An easy-to-implement 3D viewer.

The estimated man-hours for plastic molded products have been halved! An easy-to-implement 3D viewer.

Are you struggling with the time and price negotiations for creating estimates? A 3D viewer that anyone from the design department to the sales department can easily operate is available at a low price! *Free trial available.

Do you have any of these problems? ■ Most people outside the design department do not know how to handle 3D CAD... ■ Creating estimates requires gathering information from various departments, which takes time... ■ It is difficult to accurately calculate weight and pricing based solely on 2D drawings... ■ In the case of complex shapes, it is hard to see the structure and details of the product... and more. The '3DFovi' handled by C-Set allows users with a 3D viewer to reduce the workload and running costs associated with data conversion and management due to the abundance and low cost of the data. If you are considering switching from 3D CAD or from 2D to 3D drawings, why not try our free trial version? ★ If you are interested, please enter 'Request for trial version' in the inquiry button. *For information on implementation effects, please download the PDF.

  • Scientific Calculation and Simulation Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CADSoftTools

CADSoftTools

Developing various software such as "ABViewer" and "CST CAD Navigator"!

CADSoftTools is a software development company that supports numerous 2D and 3D formats such as AutoCAD DWG, DXF, HPGL (PLT), SVG, and CGM. The 2D and 3D file viewer "ABViewer" allows you to view files and obtain dimensions, create and edit 2D files, convert PDF files to editable DWG/DXF, generate G-code for CNC machines, and export to other formats. We also offer a variety of other products. Please feel free to contact us if you have any requests. 【Products (partial)】 ■ABViewer ■CST CAD Navigator ■CADEditorX ■infoCAD .NET ■infoCAD VCL Multiplatform *For more details, please refer to the related links or feel free to contact us.

  • Company：B7
  • Price：Other
  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mastercam Multi-Axis Machining Option

Mastercam Multi-Axis Machining Option

This is a 3D CAD/CAM system, ranked No. 1 in the world for installation achievements, that uses visuals extensively in the settings screen, making it easy to understand and simple to set up multi-axis machining.

The settings screen makes extensive use of visuals, allowing for easy creation of complex multi-axis tool paths. In particular, it is well-known for its rich axis settings, enabling thorough detailing of movements. The output NC data is compatible with various manufacturers' models and control panels of machine tools.

  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
BIM-compatible architectural design 3D CAD "Autodesk Revit"

BIM-compatible architectural design 3D CAD "Autodesk Revit"

Architectural design, MEP engineering, structural engineering, BIM-compatible 3D CAD for construction execution.

Autodesk Revit is a 3D architectural CAD that supports BIM (Building Information Modeling). It features parametric modeling that accurately expresses design intent using basic parts and detailed assemblies. It includes a work-sharing function that allows multiple members to work simultaneously on a centrally managed model. Additionally, it has an automatic update function that reflects changes made in one location throughout the entire Revit model, enabling efficient design and construction within a single software. We offer subscriptions and maintenance plans for "Autodesk Revit." Please feel free to contact us if you are considering implementing Autodesk Revit.

  • Drawing, tracing, CAD
  • Architectural CAD
  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Presentation: Reducing Design Rework! What 3D CAD is Suitable for Packaging Machine Design?

Case Presentation: Reducing Design Rework! What 3D CAD is Suitable for Packaging Machine Design?

By advancing the consideration of assembly and mechanical operations, we reduce rework! Achieving front-loading with ultra-fast response 3D CAD.

In the packaging machine industry, there is a constant demand to quickly launch new models into the market, and the design period has been getting shorter year by year. Additionally, to achieve higher performance, the structure of the machines has become more complex, and the difficulty of design has also increased. To address these challenges, it has become urgent to implement front-loading initiatives that aim to eliminate defects that are discovered in later stages as much as possible during the design phase, thereby shortening the development lead time. COLMINA Design and Manufacturing Support iCAD SX offers high-speed response capable of handling 3 million parts in 0.2 seconds, allowing for smooth design considerations without delays in processing, even for packaging machines with complex structures and a vast number of components. Furthermore, since assembly feasibility studies and operational verifications can be conducted for the entire system, it not only allows for early resolution of issues during startup but also facilitates smooth communication with customers and on-site personnel through specification discussions using 3D models, enabling efficient identification of requirements. iCAD improves design quality in packaging machine design and reduces development lead time. ◎ Customer case studies are currently available for limited viewing on the <special site>! ▶ Click on the special site to download now! 　　↓↓↓

  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Viewer for Manufacturing Processes "3DTascalX"

3D Viewer for Manufacturing Processes "3DTascalX"

A 3D viewer that achieves high functionality and low cost, positioned as 'more than a viewer but less than CAD.'

High-quality data conversion capable of inputting and outputting various 3D CAD data, high-precision measurement usable for processing and inspection utilizing auxiliary coordinates, easy 2D drawing creation from 3D, and the ability to verify a wide range of secondary usable data such as design change locations, heights, slopes, holes, undercuts color-coded, projected areas, cross-sections, surface areas, and mass. By utilizing it in various manufacturing processes such as sales estimates, drawing checks, construction method considerations, data conversion, processing drawings, inspections, and assembly instructions, it promotes the effective use of your company's three-dimensional data. 【Features】 - A wide range of supported data including CATIA V4, V5, NX, Creo, SolidWorks, JT, Parasolid, IGES, STEP, ACIS, Cfio, Inventor, 3DPDF, etc. - Dedicated functionality for batch processing data conversion - High-precision measurement up to 1/10,000,000 order - Approximate circular arc interpolation for ellipses and splines - Visual verification made easier by color-coding design change locations, heights, slopes, holes, undercuts, etc. - Ability to share a lot of information with minimal licensing using a free viewer.

  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Viewer for Manufacturing Processes "3DTascalX"

3D Viewer for Manufacturing Processes "3DTascalX"

A 3D viewer that achieves high precision and multifunctionality, positioned as 'more than a viewer but less than CAD'.

High-quality data conversion capable of inputting and outputting various 3D CAD data, high-precision measurement usable for processing and inspection utilizing auxiliary coordinates, easy 2D drawing creation from 3D, and the ability to verify a wide range of secondary usable data such as design change locations, heights, slopes, holes, undercuts color-coded, projected areas, cross-sections, surface areas, and mass. By utilizing this in various manufacturing processes such as sales estimates, drawing checks, construction method considerations, data conversion, processing drawings, inspections, and assembly instructions, we can promote the effective use of our company's three-dimensional data. 【Features】 - A wide range of supported data including CATIA V4, V5, NX, Creo, SolidWorks, JT, Parasolid, IGES, STEP, ACIS, Cfio, Inventor, 3D PDF, etc. - Dedicated functionality for batch processing data conversion - High-precision measurement up to 1/10,000,000 order - Approximate circular arc interpolation for ellipses and splines - Visual verification made easy by color-coding design change locations, heights, slopes, holes, undercuts, etc. - Ability to share a lot of information with minimal licensing using a free viewer.

  • Other Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simple 3D Viewer【3DFovi】

Simple 3D Viewer【3DFovi】

Easy to operate even for beginners with simple usability! A 3D viewer that achieves a low price.

"3DFovi" is a 3D viewer that focuses on "simplicity," achieving overwhelming low prices and easy operation. It can display data from major 3D CAD software such as CATIAV5, NX, Creo (formerly Pro/ENGINEER), SolidWorks, as well as 2D CAD data like DXF and DWG, and allows for simple measurements. Even those who already have a 3D viewer can reduce data conversion, management workload, and running costs for 3D viewer data due to the wide variety of supported data and low pricing. 【Features】 ■ The two main features are "Viewing" and "Measuring"! ■ Capable of directly reading various data formats ■ Simple functions that anyone can easily use 【Main Functions】 "Viewing" Loading of shapes, hierarchy (assembly), colors, cross-sections, and screen splitting "Measuring" You can measure distances, angles, and diameters, and add annotations (comments) and numbering, as well as colors. Additionally, mass and external dimensions can be checked with a single command. ★ A 30-day free trial version can be downloaded from the following link: https://www.3dtascal.com/products/trial.html

  • Scientific Calculation and Simulation Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Free trial available! In any case, it's cheap! Simple 3D viewer 3DFovi.

Free trial available! In any case, it's cheap! Simple 3D viewer 3DFovi.

Simple and easy to operate even for beginners! A 3D viewer that achieves an overwhelming low price of 46,200 yen.

"3DFovi" is a 3D viewer that focuses on "simplicity," achieving overwhelming low prices and easy operation. It can display major 3D CAD data such as CATIAV5, NX, Creo, SolidWorks, Inventor, as well as 2D CAD data like DXF and DWG, and allows for simple measurements. Even those who already have a 3D viewer can reduce data conversion, management labor, and running costs for 3D viewer data due to 1. the large variety of supported data and 2. the low price. 【Features】 ■ The two main functions are "View" and "Measure" ■ Directly reads various data formats ■ Simple features that anyone can easily use ■ Includes a 2D DXF and DWG viewer 【Main Functions】 "View" Loading of shapes, hierarchy (assembly), colors, cross-sections, and screen splitting "Measure" You can measure distances, angles, and diameters, and add annotations (comments) and numbering, as well as colors. Additionally, mass and external dimensions can be checked with a single command. ★ Please download the 30-day free trial version from the link below. https://www.3dtascal.com/products/trial.html

  • Scientific Calculation and Simulation Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Do you know of a 3D viewer that can be used for molding and processing plastic products?

Do you know of a 3D viewer that can be used for molding and processing plastic products?

Create drawings from 3D data with low cost and easy operation - '3DFovi' makes estimation work easier! Free interview articles from companies that have implemented it.

【Solving Such Problems!】 ☑ Efficiently create proposal-based estimates by checking for undercuts, sink marks, insufficient strength, etc. ☑ View product cross-sections and structures in detail. ☑ The sales department can also view 3D data, reducing the workload within the department. ☑ Easily present issues related to mold production and create documentation. ☑ Halve the man-hours for estimating plastic molded products. ☑ Reduce prototype lead time by 10% and improve quality, etc. Recommended for those who say, "I don't need 3D CAD..." or "I want to transition from 2D to 3D without burden..." Why not try the free trial version to see how easy it is and to improve efficiency? ★ If you are interested, please enter "Request for trial version" in the inquiry button. *Please download the interview article as a PDF.

  • Scientific Calculation and Simulation Software
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D CAD/CAM system 'Mastercam' *Case study presentation

3D CAD/CAM system 'Mastercam' *Case study presentation

Numerous enhancements of new features that contribute to improving processing efficiency and quality. A document summarizing case studies from six companies is also being provided.

"Mastercam" is a 3D CAD/CAM system equipped with a variety of functions for design, modeling, and the creation of machining programs, as well as for the conversion, verification, and transfer of NC data, making it applicable to a wide range of machining across various industries. The latest version, "Mastercam 2023," further enhances its features. [Version Upgrade Features] ■ 3D roughing undercut detection ■ B-axis contour turning ■ Unification of "Unified" multi-axis toolpaths ■ Revamped machining group settings ■ Strengthening of "Equal Scallop" toolpaths ■ Mesh model editing ■ Enhanced 3D roughing connection operations ■ Strengthening of deburring toolpaths We are currently distributing materials summarizing case studies from six companies that have implemented "Mastercam." These are presented in an interview format, showcasing the background and effects of the implementation. [Case Study Overview] "Changes in employee awareness, improvements in production planning, increased productivity" "Reduction in machining time, decrease in the number of tools used" "Utilization in promoting DX at the site" "Replacing manual input of NC data with CAD/CAM" "Response to increasingly complex designs" *Please refer to the product materials available for download in PDF format.

  • Other CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of 3D CAD

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.